As part of a more than $1 billion modernization commitment across its footprint, Southwire reports that its state-of-the art rod plant in Carrollton, Georgia, will have been completed by the end of 2022, with a grand opening to be held in early 2023.

A press release said that the new plant, which replaces a 40-year-old facility, will increase copper rod production by at least 10%. “Our goal as a company is to be generationally sustainable, and the construction of this plant is a key milestone on that journey. This is a significant investment in our future,” said Southwire President and CEO Rich Stinson. “We are proud of our industry-leading influence, and this new facility will set a higher global standard for sustainability and efficiency in rod manufacturing. It’s a great time to be in the electrical industry and an even better time to be at Southwire.”

In 1963, the company patented Southwire Continuous Rod (SCR®) technology, which transformed the wire and cable industry. More than half of all copper rod in the world has passed through a SCR system in some capacity. The new rod plant will produce more copper rod than any other SCR system, while encompassing a smaller environmental footprint.

As the company continues its focus on sustainability, Southwire is partnering with Carroll EMC to use all renewable electricity for the facility. Southwire will work to not just meet, but exceed, state air quality requirements through its focus on air emissions controls, including the installation of a “wet scrubber” system. The facility will also continue to capture 100 percent of the stormwater runoff for reuse in the company’s manufacturing processes.

 “Our team is thrilled to evolve the modern assets and technology that have made Southwire an industry leader while, at the same time, advance our values of empowerment, trust, consistency and inclusion,” said Senior Vice President of Modernization Will Berry. “This new plant illustrates our long-standing commitment to sustainable growth.”

Cuba has contracted with France’s Orange, asking the French telecom to build an underwater cable that will link it to the island of Martinique.

Per multiple media reports, the news came about a week after the Biden administration recommended that U.S. regulators deny a request by submarine cable operator ARCOS-1 to connect Cuba to the United States through a new undersea cable landing station.

The objection from the U.S. was based on concerns that the cable-landing system in Cuba would be owned and controlled by Cuba’s state-owned telecom monopoly, Empresa de Telecommunicaciones de Cuba S.A. (ETECSA). The proposal would have created the only direct, commercial undersea cable connection between the U.S. and Cuba.

No details were released about the cost or capacity of the cable, which is to be supplied by Alcatel Submarine ETECSA. President Tania Velazquez said that work had begun on the project. “Today the official act was held to begin the technical work of installing the new submarine cable, the joint work of ETECSA and Orange, which will allow the diversification of Internet connection routes in Cuba,” he said on Twitter.

The sole undersea telecom that Cuba has is to Venezuela, part of ALBA-1, an 8,400-km fiber-optic cable system that was launched in 2001. ALBA-1 extends between the United States, the Bahamas, the Turks and Caicos Islands, the Dominican Republic, Puerto Rico, Curaçao, Venezuela, Colombia, Panama, Costa Rica, Nicaragua, Honduras, Guatemala, Belize and Mexico.

Per Wikipedia, ETECSA is the sole lawful provider of telephony and communications services in Cuba, in essence, a communications state monopoly that has some eight million clients, both national and foreign.

Alleima has received an order for ultra-fine wire in the company’s medical customer segment, worth approximately $33.5 million.

A press release said that the order was booked in the fourth quarter of 2022, with deliveries scheduled to ramp throughout 2023. The order will be reported in the company’s Kanthal division.

“Growing the Medical segment is one of the cornerstones in our strategy for profitable growth,” said Alleima President and CEO Göran Björkman. “With this order, we are taking an important step in adding to our addressable market by accessing a number of new patient applications.”

Gary Davies, head of the medical business unit in the Kanthal division, said that the wire will be used for the remote monitoring of patients, a fast-growing market. The order “is a result of the commercialization of a new product, with leading edge technology and high accuracy.”

Alleima, formerly Sandvik Materials Technology, is a global manufacturer of high value-added products in advanced stainless steels and special alloys as well as solutions for industrial heating. It has more than 5,500 employees and customers in approximately 90 countries.

After more than 30 years of leadership in manufacturing and nearly a decade with the company, Kathleen Edge, Southwire’s executive vice president of operations, has retired. She joined Southwire in 2013 and led the company’s wire and cable operations, including Southwire’s single largest strategic initiative, modernization. As part of the transition, Rebecca Cranford, senior vice president, construction systems & solutions, will assume leadership for all wire and cable manufacturing. Aaron Asher will now be responsible for wire and cable distribution and materials management, reporting to Norman Adkins. Based in Carrollton, Georgia, Southwire is a leading manufacturer of wire and cable used in the transmission and distribution of electricity.

Patty Brooks has been promoted to plant manager of Liberty Engineered Wire Products in Warren, Ohio, where she had been the assistant plant manager. She previously worked for eight years for sister company Liberty Bar Products, where she started out as an inside sales representative, then served as office and customer relations manager and then as assistant plant manager. Previous employers included Avatar Corporation, Keystone Bar Products and Bonnell Aluminum. Based in Upper Sandusky, Ohio, and with production facilities in Warren and Las Cruces, New Mexico, Liberty Engineered Wire Products manufactures welded wire reinforcement.

Jaxon Lang has joined AFL as COO, responsible for overseeing the company’s operational performance as well as managing its supply chain, commercial sales, marketing and customer service divisions across AFL’s five core markets. He has more than 25 years of experience in the telecom industry, and has a solid record of leading and managing businesses through transformations, including mergers and acquisitions. He will assist AFL and Fujikura in the future growth of the business. He most recently was president and CEO of FiberRise, and prior to that held key positions over two decades at CommScope, TE Connectivity and ADC. A subsidiary of Fujikura, AFL manufactures a wide range of fiber optic cable.

Thomas W. Walker has been named senior vice president of marketing and business development of Wire and Cable Consulting, LLC. In 1984, he joined Crellin, Inc. (which later became Sonoco/Crellin) as an account manager, selling plastic and wire reels, tapes, bobbins and solder spools. He later joined Pittsfield Plastics Engineering, serving as its president until he retired in 2022. A WAI Life Member, he is a recipient of the Charles Scott Distinguished Award and has served on the board of the Wire & Cable Manufacturers Association. Wire and Cable Consulting, LLC, provides sales representation, marketing and new product development services.

Jonathan Reeves has joined the technical support department of AESA Cortalloid. He previously worked at CERN (European Organization for Nuclear Research), where he participated in the development of energy extraction devices used in quench protection systems for superconducting magnets in the CERN particle accelerator complex. He holds a master’s degree in electrical and electronic engineering from the University of Nottingham (UK). Based in Sweden, AESA Cortalloid supplies measuring systems and services to the wire and cable industry.

TE Connectivity has promoted Rebecca Graham from distribution account manager to industrial sales manager for Australia. Based in the Greater Brisbane area, she previously worked for NKT Australia for more than seven years. Prior to that she worked a year for AUSSA Power Products. A global business, TE Connectivity’s products include a range of wire and cable.

Encore Wire Corporation announced that Bret J. Eckert, the company’s CFO, has taken on the additional position of executive vice president. He joined the company in 2019 and formally assumed the CFO role in 2020. Prior to joining Encore, he served for a year as an executive managing director for Riveron Consulting LLC, and prior to that was senior vice president and CFO of Atmos Energy Corporation for five years. Before that, he spent 22 years with Ernst & Young LLP, where he was a partner for 10 years. Based in McKinney, Texas, Encore Wire is a leading manufacturer of a broad range of copper and aluminum electrical wire and cable

Obituary
John Schleicher, director of technical services & wire products manager for IWM International LLC, died Nov. 28, 2022, at age 62. Prior to joining IWM in 2016. He worked for about two years as director of technical services for Mount Joy Wire and 19 years for New York Wire, where he served in positions from senior engineer to wire operations manager. A WAI member, he was a life member of the SME and was greatly valued for his wire industry relationships. He held a BSIE degree in industrial and manufacturing engineering from Penn State University. He is survived by his wife, Barbara; daughters Anna and Molly; a son, Samuel; a brother, Thomas; and grandchildren, numerous nieces, nephews, and extended family. 

The Association has added four members to its Board of Directors (BoD) that will each serve a three-year term. Three are new, while the fourth is returning. The BoD now has a total of 21 members. That includes nine suppliers, and 12 manufacturers: seven from the electrical sector and five from the ferrous sector. Completing their terms on the BoD were Marco Gerardo, Frigeco USA; and Thomas Heberling, Southwire.

  Eric Bieberich is the president of Fort Wayne Wire Die (FWWD). Over his more than 20 years with FWWD, he has held various positions in engineering, production management, sales, and general management, before becoming president in 2013. Prior to joining FWWD, he worked as a metallurgical engineer in the automotive industry. He holds B.S. and M.S. degrees in materials science and metallurgical engineering from Purdue University and an MBA from the University of Michigan. He has previously served two terms on the BoD and was also the chairman of the WAI’s Education Committee. He has been a WAI member since 2001.

 Andrés Cartagena Ruiz is the head of MFL X and customer care at MFL Group. MFL X is an innovative program focused on digital projects that leverages exponential technologies, which facilitate data-driven after-sales support and product development. He also serves on the Board of Directors of 40Factory, a high-tech scale-up that operates in the fields of Industrial IoT and Artificial Intelligence. He volunteers as a mentor of Forward Factory, an Italy-based technology start-up accelerator dedicated to digital innovations in the manufacturing domain. He is also on the Advisory Committee of MindSphere World Italy and the Scientific Committee of Messe Frankfurt Italia. He holds a B.S. degree in mechanical engineering from Purdue University and an MBA from IE Business School.

 Rebecca Cranford is the senior vice president of manufacturing, responsible for operations within the utility and industrial divisions at Southwire Company. Since joining the company in 2012 as senior vice president of sustainability, safety and environment, she has held progressively responsible positions including her prior role as senior vice president of manufacturing for construction systems and solutions division which primarily services the building wire market. She began her manufacturing career with Alcoa as a safety engineer. She spent 15 years in a variety of roles within several global divisions, including AFL (Alcoa Fujikura Ltd.), Howmet Castings and Alcoa Forging and Extrusions. She previously worked in the insurance industry as a risk manager. She holds a B.S. degree in safety and environmental management from Slippery Rock University of Pennsylvania.

 Chris Tucker is the director of nonferrous metals at Encore Wire. He joined Encore in 2012 as a process engineer and has held progressively responsible positions in rod operations before being named to his current position in 2018. He has been a member of the Association since 2012 and currently serves on the Member Relations and Paper Awards Committees. Additionally, he was on the planning committee for the 2019 Global Continuous Casting Forum. He holds a B.S. degree in mechanical engineering from the University of Texas at Tyler.