How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Welder
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 11 months ago #2284 by Archived Forum Admin
Welder was created by Archived Forum Admin
I am looking for a suitable welder for `Stranded Copper Conductor' ranging from 0.3 Sq.mm to 16Sqmm. Please suggest an available model including Technical Data and suitability for using the welded conductor for manufacturing of Automotive Wires.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2285 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Welder
Hello once more Shekhar,
AUGUST STRECKER GmbH & Co. KG in Germany is where you should be looking.
www.strecker-limburg.de/
I am confident you can figure the rest out by yourself.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
AUGUST STRECKER GmbH & Co. KG in Germany is where you should be looking.
www.strecker-limburg.de/
I am confident you can figure the rest out by yourself.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2286 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Welder
Thanks for the info. I had already sent an enquiry to Strecker, Germany. Is that the only source.
Sheks
Sheks
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2287 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Welder
AUGUST STRECKER GmbH & Co. KG is by far the best in my experience. I am also aware that hydraulic cold welders have been used for large sizes but generally speaking, they are far too slow.
These welds are of course always cut out later in the process.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
These welds are of course always cut out later in the process.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2288 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Welder
"These welds are of course always cut out later in the process."
Does that statement of yours means that I can not use the welded strand in finished Insulated Automotive Wire.
Does that statement of yours means that I can not use the welded strand in finished Insulated Automotive Wire.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2289 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Welder
Shekhar,
Check your specifications for that answer.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Check your specifications for that answer.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.097 seconds