How to resolve AdBlock issue? × Questions concerning iron and steel, steel making, rod rolling, galvanizing, springs, nails, fencing, and patenting go here.
Cropping and chamfering
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 11 months ago #1060 by Archived Forum Admin
Cropping and chamfering was created by Archived Forum Admin
Hi there from Australia, does any one know of a wire cropping and chamfering machine supplier for wire sizes 3.175mm to 6.3mm [1/8" to 1/4"]we want a finished to length size clean cut end.
Cheers Morrie Walton
Traps Wire Works,
Queensland Australia
Moderator's note - This is a requirement for steel wire.
Cheers Morrie Walton
Traps Wire Works,
Queensland Australia
Moderator's note - This is a requirement for steel wire.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 11 months ago #1061 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Cropping and chamfering
We have moved this from "Supplies and Equipment" to "Ferrous" in the hope of getting a more timely response.
Peter Stewart-Hay
(WAI Forums Moderator)
Peter Stewart-Hay
(WAI Forums Moderator)
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 11 months ago #1062 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Cropping and chamfering
You may want to check out the following company:
WAFIOS Machinery Corp.
27 Northeast
Industrial Rd
Branford CT
06405 - USA
Tel 203-481-5555
Fx 203-481-9854
www.wafios.com/
Select the "Wire straightening & cutting machines" section.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
WAFIOS Machinery Corp.
27 Northeast
Industrial Rd
Branford CT
06405 - USA
Tel 203-481-5555
Fx 203-481-9854
www.wafios.com/
Select the "Wire straightening & cutting machines" section.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Peter J Stewart-Hay, Eduardo Anaya, Peter M Power
Time to create page: 0.080 seconds