Wirenet Image Band
wirenet.org mobile image band
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Skin effect in stranded wire
× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.

Skin effect in stranded wire

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 11 months ago #565 by Archived Forum Admin
Skin effect in stranded wire was created by Archived Forum Admin
Does any one have any calc or research to show the of what the skin effect is in stranded wire? I suspect that because each strand is slightly oxidized that it may be slightly deeper then the normal depth of penetration at a given frequency for AC, but not the total cross section as would be for litz wire...any comment would be greatly valued,
Thanks,
Ben

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 11 months ago #566 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Skin effect in stranded wire
Hello again Ben,

Could you be a little more specific about the stranded conductors you are interested in re skin effect?
A) - Large Conductor Power Cable - Concentrically Stranded or to the standard Milliken design.

B)- Concentrically Stranded Conductor Audio Cable to say 20 kHz.

C) - Data Cables with concentrically stranded conductors.

D) - Radio Frequency Cables with concentrically stranded inner conductors.

E) - Other, please elaborate.
Thank you.

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 11 months ago #567 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Skin effect in stranded wire
I'm interested in carrying large amount of current at with multiples of 2/0 7/37/23 at a frequency from 60 to 300hz. I may have application to 10,000hz in the future.

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 11 months ago - 12 years 8 months ago #568 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Skin effect in stranded wire
What an unusual construction (67 wires)! Is this perhaps a 1/6/12/18/24 (61 wire) conductor?

Anyway, please review "Google" www.google.com as follows:

Type in Skin-Effect Calculation exactly as shown and see if there is anything there that gives you the precise information you are looking for.

We also recommend you check this out at Google Scholar as well scholar.google.com/schhp?sourceid=navclient&hl=en

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Last edit: 12 years 8 months ago by Archived Forum Admin.

Please Log in to join the conversation.

Moderators: Erik A Macs, Peter J Stewart-Hay
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Skin effect in stranded wire
Time to create page: 0.075 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777