Elizabeth Bonfield proved to be a most competent and congenial representative from the U.K. as she continued the Clockwinding Ceremony that was first held on Oct. 20, 1948. At that time, British representatives of their country’s wire industry—headed by John Rigby—presented the grandfather’s clock in thanks for support during World War II. Ever since, it has been a cherished piece of history kept at WAI’s headquarters.
WAI President Kurt Breischaft welcomed Elizabeth Bonfield, who was accompanied by her husband Steven, to the Association’s offices in Madison, Connecticut. “As an industry we appreciate the relationship between the U.S. and U.K., and this symbolic act for that, so thank you for coming.” The audience also included WAI BoD members Rebecca Cranford, David Fischer and Chris Tucker; WAI Past President Jim York; and Association staff, including WAI Executive Director Steve Fetteroll.
“It’s an absolute pleasure to be here,” Bonfield said. She has worked at the director level in the engineering, manufacturing and construction sectors for the past 20 years, most recently for Skills 4 UK, a Leeds-based consultancy firm. She observed that “we should pay our respects to John Rigby, and the forefathers who brought this clock here.”
Bonfield said she was familiar with many of the people in photos of past clockwinders on the wall in the lobby area. She pointed out John Rigby, and his son, Peter, who twice (1979 and 1998) served; Darrell Fox (1992), whose business is not far from where she lives; Peter Siddal, who came in 1999, “a wireman through and through,” who returned in 2010 with his wife, Kate, who worked in the industry and served as the Clockwinder; Steve Rutherford (2003) from Briden Wire, now retired; Lindsay Millington (2019), the Under Warden of The Worshipful Company of Tinplate Workers alias Wire Workers; followed by Martin Thacker, who served twice (2020-21) via zoom before doing it live in 2022. The tradition has continued over time, yet it too is part of the life cycle. “Sadly, we lost two clockwinders, Peter Rigby and Peter Siddal, since the last time the clock was wound,” Bonfield said.
The Clockwinding ceremony ties together many aspects of the industry. Bonfield said that the meaning is still felt in the U.K., and that it was an honor for her and Steven to be there. “Your friendship, commitment to continued collaboration is just a delight, so I feel very privileged to wind the clock.” She proceeded to do just that, checking several times to verify she was not over-tightening it. Assured that the Clock indeed was ready for the next year, she turned over the key, with a smile that reflected a look of relief that all had gone well.
While Bonfield talked a lot about the people who have been part of the Clockwinding ceremony, she also shared a historical tidbit about one practitioner in the U.S. wire industry. Paul Revere, who in addition to being a patriot that went on a well-known midnight ride, was for a period, during “lean times,” also a dentist. He would wire in false teeth made from walrus ivory or animal teeth, and became the first person to practice forensic dentistry in the U.S. “How brilliant the use of wire can be,” Bonfield said, adding that it makes one wonder “what will be going on 250 years from now.”
It was fitting that there was a twist to the tradition of giving the U.K. representative a Clockwinder tie. This year, the memento was a stylish scarf designed by WAI Director of Marketing & Corporate Communications Janice Swindells.
After the ceremony, the participants met for dinner at the Madison Beach Hotel, where there was further talk of tradition and cooperation. There was also a free flow of conversation that went into many directions, capturing the bond of those who are part of the field, and genuinely enjoy the company of their peers. It is that spirit that hopefully will enable the Clockwinding ceremony to continue for future generations as they face new challenges.

The return to Mohegan Sun Casino for the WAI should be a good one. A total of 102 floor spaces (units)— representing more than 60% of the available booth space—was sold at the Points Meeting for Wire Expo 2024, to be held June 10-12 at the Mohegan Sun Casino Resort. A total of 91 companies took part in the Points Meeting, held Oct. 11 at WAI’s headquarters.

The fees for registration are presented below, with the schedule shown on the next page. A key date is May 31, as that is when advance rate discounts expire, making now a very good time to act. The cost for an all-access registration is $720, and $620 for WAI members. A non-member who signs up for $720 gets a one-year membership. After May 31, the cost increases to $695 for non-members and $595 for members.

Registration for the Fundamentals of Wire Manufacturing Course on Monday, June 10, costs $495, and $395 for WAI members. A non-member who signs up for $495 gets a one-year membership.

Other event options include access to exhibits and Product Solutions demonstrations. That cost is $125, increasing to $140 after May 31. A ticket for the Welcome Reception, always the best way to meet up with the industry, is $140.

The schedule, presented at www.wireexpo24.com, provides an overview of what attendees can expect. The March issue will include a “prequel” of the event that provides a close look at what will be offered, but a few notables will be the awarding of WAI’s 2024 Champions Award to Keynote Speaker H. Woltz, president/CEO of Insteel Industries; the Mordica Lecture by W.T. Bigbee, vice president operations of Encore Wire; and Keynote Speaker Paul Furtado, COO, Prysmian.

WAI previously staged Wire Expo in 2016 at the same site, where some 240 companies were represented on the show floor.

Golfers participating in the New England Chapter’s annual golf tournament largely shrugged off what was an ugly morning, described by one player as “a white-knuckle” drive to the Tunxis Country Club in Farmington, Connecticut. The weather gods, however, were in a giving mood, and the skies cleared, not reverting to a hard rain till almost all of the 135 golfers had finished their rounds, joined by another 15 non-golfers.

It was an especially good day for the Fluorogistx-sponsored team of Jim Elliott and Rick Larson from New England Wire Technologies, and Jim Bliss, Marmon IEI, who won with a score of 60, 12 under par. Three teams followed at seven under. For all those who played, however, it was a memorable day, perhaps even that much better because of how uncertain it had been.

“The New England Chapter produced another great event with the full support of their Board of Directors and WAI’s staff,” said WAI Executive Director Steve Fetteroll. “This is a special event that brings the industry together for fun networking, and I credit that to Chapter Chairperson Jess Foss and Golf Chairman Jim Evans, who are both roll-up-your-sleeves leaders who made sure the event delivers.”

“Despite a rainy morning leading up to registration, it turned out to be a beautiful day for golf,” said Foss, market development manager, Electric Cable Compounds Inc. She noted that the tournament continues to serve multiple goals. “As always, it was an excellent opportunity to network with industry colleagues, with the added benefit of being able to do so and enjoy the outdoors. We are fortunate to have many generous sponsors and attendees who make the event possible and support the NEC scholarship fund through our raffle and charity holes. I am already looking forward to what’s in store for next year, which will be our 30th anniversary!”

Foss and Evans both thanked all the companies that sponsored the event, which is also a significant contributor to the chapter’s scholarship program. Skills and special sponsors included: Amacoil Inc., Carris Reels Inc. (3), Chase Wire & Cable Materials, Commission Brokers Inc., Electric Cable Compounds Inc., Electronic Drives & Controls, Fenn LLC, Fluorogistx, Gem Gravure Co. Inc. (3), James Monroe Wire & Cable Corp. (2), Joe Tools, Lloyd & Bouvier Inc. (4), M. Holland, Mathiasen Machinery Inc., The MGS Group, Multi/Cable Corp. (2), Rainbow Rubber, RichardsApex Inc., Summit Plating, Teknikor, Teknor Apex Co., W Gillies Technologies LLC, Wire & Plastic Machinery Corp. (2), Wire & Plastic Machinery Corp. and Zumbach Electronics Corp.

Hole sponsors included: Amaral Automation, Amacoil Inc., Carris Reels Inc., Fenton Group, Fluoropolymer Resources Inc., Gem Gravure Co. Inc., Geon Performance Solutions. James Monroe Wire & Cable Corp. (3), Joe Snee Associates, Inc., Lloyd & Bouvier Inc., M. Holland, Owl Wire and Cable LLC, Quabbin Wire & Cable Co. Inc. (2), REELEX Packaging Solutions Inc., RichardsApex Inc., Sikora, Teknikor, WCMA, Wire & Plastic Machinery Corp. and Zumbach Electronics Corp.