Wirenet Image Band
wirenet.org mobile image band

Nexans, a leader in advanced cabling systems, solutions and services, has completed the final test to qualify its state-of-the-art 420 kV XLPE subsea cable for installation at a world-record depth of 550 meters (1,804 ft).

A press release said that the cable testing, carried out by Nexans Norway, was done to meet a specific customer need. The cable is to be used for a project that requires a subsea power interconnector crossing Fensfjorden—a fjord close to Bergen in Norway—which is approximately eight km wide and 526 meters at its deepest point.

The Fensfjorden project is part of a broader plan by BKK Nett AS, one of Norway’s largest power companies, to strengthen the electrical grid in Western Norway. That plan includes a new 420-kV connection between Modalen-Mongstad that will ensure a stable and reliable power supply to over 420,000 residents, businesses and industry facilities throughout the region.

“We have every reason to be proud of what we have accomplished,” declared Nexans Project Manager Ivar Rolfstad. “We have pushed the technological boundaries and (beaten) our own previous world records!”

The new record tops the prior one that had been set by Nexans, for a 20-km 420 kV XLPE cable that was installed in water that was 390 meters deep in the fjord of Hjeltefjorden, Norway.

Nexans developed and produced the Fensfjorden cable at Nexans Norway facility in Halden. Installation on the bed of the fjord will be performed by a Nexans cable-laying vessel, the C/S Nexans Skagerrak, later in 2019, the release said.

Hubbell, which is based in Connecticut, announced that it will close two plants in the state over the next five to six months, and move that production to other locations.

A statement from the company said that it plans to close its plants in Newtown and Bethel, which would result in 194 jobs being cut. Per an article in The Newtown Bee, the Newtown location, which opened in 1960, “currently houses commercial and industrial wiring device manufacturing,” with about 140 employees there. The Bethel facility employs 54 people, according to a notice filed with the Department of Labor. Most of the work will move to a larger Hubbell facility in Vega Baja, Puerto Rico. Most of the work at the Bethel plant, which Hubbell acquired in 2009, will move to another company plant in Alabama.

Per the article, Newtown First Selectman Dan Rosenthal said that he was told by a company official that the Newtown facility was in good condition, but that it was only operating at about 40% of capacity, manufacturing the exact same product line that was also being made at the Puerto Rico plant. He added that the same situation existed for the Bethel plant.

A company statement said that the closure of the Newtown and Bethel plants are “part of an ongoing operational efficiency initiative that involves Hubbell operations across the company.” In the article, officials for Hubbell, which is based in Shelton, Connecticut, note that the company still has 650 jobs in the state. Hubbell has offices and plant locations across the U.S. and globe, including Puerto Rico, China, Mexico, Canada and Brazil.

NKT announced that it has won a contract from Energinet and National Grid to supply power cable for the Viking Link interconnector project that will connect Danish and British transmission grids.

A press release said that the order from the owners of Viking Link, worth approximately €90 million, will see NKT provide approximately 150 km of 525 kV MI high-voltage DC onshore power cables. The NKT power cables will be manufactured in Karlskrona, Sweden, with production expected to start in 2020. The power cable will run from the Denmark shore to the power grid substation in Revsing, southern Jutland.

NKT Interim CEO Roland Andersen said that the Viking Link is a key project for the North-European transformation towards renewable energy supplies. "The award is a recognition of our technological competences also in the growing extra high-voltage interconnector segment from Energinet and National Grid."

The release said that when completed, the760-km long DC interconnector line will help balance wind production and demand across countries, and closer integration between transmission grids is important for the efficient transition towards a green energy future. Implementation of Viking Link is a vital step towards achieving ambitious renewable targets in both Denmark and the U.K. The interconnector line is scheduled for commissioning in 2023.

The Prysmian Group, a world leader in the energy and telecom cable systems industry, has been awarded a contract from National Grid Viking Link Limited and Energinet to supply the majority of the power cable that will be needed for Viking Link, the first submarine cable connection between the U.K. and Denmark.

A press release said that the contract for Prysmian, worth close to €700 million, includes the turn-key design, manufacture and installation of the world’s longest interconnector. The project will require 1,250 km cable for the submarine route, and some 135 km of the land cables for the U.K. side. A separate related award for land cables was issued to NKT.

The High Voltage Direct Current (HVDC) interconnector will operate at ± 525 kV DC. It will allow up to 1,400 MW of power to be transferred between the two countries, passing through U.K., Dutch, German and Danish waters, using single-core, mass-impregnated paper-insulated cables. The system will connect the converter station located at Bicker Fen in Lincolnshire, U.K., to the converter station located at Revsing in southern Jutland, Denmark.

"This project further confirms our undisputed market and technology leadership," said Hakan Ozmen, EVP Projects, Prysmian Group.

Prysmian plans to manufacture all cables for the project at its operations in Arco Felice, Italy, with the offshore cable operations to be carried out by its new installation vessel. Jointly owned by Energinet and National Grid, the Viking Link interconnector project is scheduled to be commissioned at the end of 2023.

"We are proud to have the opportunity to support two of our most important customers, National Grid and Energinet, in the development of such a strategic infrastructure, which will represent a milestone for the upgrade of the entire EU power transmission grid," said Prysmian Group CEO Valerio Battista.

Germany’s Leoni announced that it is considering plans to either sell or float a stock market listing for its Wire and Cables Solutions (WCS) business, based on a broad review of the company’s group structure, and a decision to focus on its Wiring Systems Division (WSD).

A press release said that the company had considered the optimal future ownership structure of both the WCS and its Wiring Systems Division (WSD) to determine how both divisions could achieve their full potential.

The WCS serves a wide range of growing end markets, such as healthcare, factory automation, transportation and automotive. The release noted that with its LEONiQ technology, "WCS is well positioned to become the front runner for intelligent cable solutions."

The WSD, which supplies engineered cables and interconnect solutions, and is anchored by the automotive field, "is on the way to sell not only products, but increasingly provide services in engineering, architectural design and simulation," the release said.

Leoni’s Board of Directors found very limited synergies between both divisions, and intends to increase their operational independence, the release said. In this context, corporate support functions will transfer from the holding company to the divisions.

"We believe that both divisions will benefit from a separation," said Leoni Chief Executive Aldo Kamper. "This creates two clearly focused businesses, whose individual market and technological developments as well as investments can be better and more quickly implemented."

The decision to separate WCS from the group and focus resources on WSD will strengthen our ability to further strategically develop this business, Kamper said. "This would create two clearly focused businesses, whose  individual market and technological developments as well as investments can be better and more quickly
implemented."

With its focus on WSD, Leoni expects to be in a better position to focus on operational improvements and continue to build on its leading position in automotive wiring systems. It could concentrate its resources on being a global solutions provider for the automotive sector while seeking emerging opportunities on the energy and data side. With its WSD becoming a systems supplier and development partner to its customers, Leoni is on the way to sell not only products, but increasingly provide services in engineering, architectural design and simulation.

Bruno Fankhauser, a member of the Board of Directors of Leoni with responsibility for the WCS division, agreed that the split made sense. "We have shown strong growth in recent years and have maintained a leading position as a provider of intelligent cable solutions and services. With today’s decision, we want to put the WCS division in a position to realize its full potential more quickly with a different ownership structure."

While either a sale or stock market exit is envisioned, a partial sale is also possible, the release said. "To date, no final decision has been taken in this regard. However, following a potential separation, Leoni’s primary focus would be on the development of its WSD division. To this end, Leoni has begun to mandate respective advisors."

The company notes that implementation of its VALUE 21 program is on track to achieve sustainable gross cost savings targets of €500 million per year by 2022, with 75% of the savings expected to be realized in WSD.

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777