The Wire Association International will once again partner with two other industry associations—IWMA and ACIMAF—to hold Wire & Cable Krakow. The one day event will be held on Oct. 14, 2025, at the Holiday Inn Krakow City Centre.

In addition to the three industry associations, Wire & Cable Krakow has the support of the University of Science and Technology (AGH) and Czestochowa Technical University (CTU).

The Conference Committee includes Don Neville, RichardsApex Europe, Ltd., IWMA; Ferrucio Bellina, TKT Group, ACIMAF; Eric Bieberich, Fort Wayne Wire Die; Jessica Bennett, IWMA; Dr. Beata Smyrak, Prof. Tadeusz Knych; both of AGH University, Poland Chapter; and Steve Fetteroll, WAI.

While planning for the event continues, the format will be similar to that for Wire & Cable Milan in 2023, which got very good reviews. Wire & Cable Krakow will have an electrical and a nonferrous track, each with up to 12 slots that will last 20 minutes. Look for more information to follow in future issues.

On April 4, WAI volunteers and staff joined forces at the Points Meeting for the initial allocation of exhibitor booth space for the 2025 Interwire Trade Exposition, which will be held on May 13-15, 2025, in Atlanta.

The Points Meeting is important because it is used to decide where booths will be placed based on a formula that uses the number of years of participation and the size of booth. A total of 118 companies took part in the Points Meeting that was held online at the WAI’s office in Madison, Connecticut. By the end of the day, 64,000 sq ft of exhibit space was reserved.

The team that managed the process included volunteers Erik Macs of Wire & Plastic Machinery; Harish Panchal, consultant; Joe Snee of Joe Snee Associates; and John Zachow of Davis-Standard. WAI staff representative included the sales team of Anna Bzowski and Shannon Timme; Corey Flynn, manager of member services; Chuck Szymaszek, director of technology; and Sheila Kuever, controller.

Also there was WAI Executive Director Steve Fetteroll, who said that the smoothly run kick-off bodes well for Interwire, which requires extensive planning in many stages. “I am grateful to the entire team for their efforts. The process works well, and during it a lot of elements have to be addressed so that when attendees walk the show floor next year, all is right.”

Fetteroll, who served as an observer during the day-long meeting, said that the results for the kick-off were inspiring. “It’s hard to appreciate just how widespread and committed the industry support is for Interwire. Of the 118 exhibitors that reserved floor space, 110 had participated in previous shows, with many having done so since the event was launched in 1981.

In a launch that may be as innovative for the WAI’s technical mission as the introduction of multi-wire drawing systems, the Wire Association International will debut its new online training and professional development program at the WAI Resource Center during the upcoming Wire Expo.

WAI will premiere its first video, “Introduction to Ferrous Metallurgy,” from the initial module titled “Fundamentals of Ferrous Metallurgy.” The videos are currently undergoing production, promising a captivating learning experience unmatched in the industry. What makes them innovative is that the online training incorporates animation with actual shop floor footage and includes interactive knowledge checks throughout.

The videos are being produced through a WAI partnership with a motion designer company and will be thoroughly vetted by industry veterans. Plans call for multiple modules to be produced each year. The first one, to be shown at Wire Expo, is a snippet, but it will be substantial enough for viewers to sense its potential, a taste of what is to come.

“WAI is poised to revolutionize professional development in our industry,” said WAI President Daniel Blais of Prysmian. “We anticipate the modules will serve as an unparalleled educational resource, empowering employees with the knowledge and skills essential for success.”

The full module, slated for release later this year, will also mark the launch of WAI’s new learning management system. This state-of-the-art platform is designed to provide comprehensive educational content and interactive features, catering to the diverse needs of professionals.

“Our commitment to excellence shines through in this initiative, reinforcing WAI’s mission to foster knowledge, collaboration, and growth within the Association’s global network,” said WAI’s Executive Director Steve Fetteroll.

Wire Expo attendees are encouraged to stop by the WAI Resource Center to learn more about the program, see the preview of the first video and share their thoughts.

Madison, Connecticut, USA – November 16, 2023 – The Wire Association International (WAI), Inc. reports it completed another popular educational program and Suppliers Market in Monterrey, Mexico, at the Crowne Plaza Hotel, November 13-15, 2023, which marks the fourth staging of the event in Monterrey.

Commenting on the occasion, 2009 WAI Past President Antonio Ayala said “The conference had first-class presentations that were informative for all personnel levels. The table top exhibits in the Suppliers Market were of high quality and staffed with technical people. All enjoyed the meal and music at the welcome dinner. And the visit to the Viakable plant was both well planned and well received. Overall the conference was a success.”

HIGHLIGHTS
NOVEMBER 13 and 14
Seven presentations were held throughout the day Monday beginning with a panel discussion among wire and cable executives about the challenges and opportunities that will define the industry over the coming years. Panelists included Felipe Martinez, CEO, Kobrex, S.A. de C.V.; Andres Guerra Siller, Commercial director of mesh and wire, DeAcero S.A.P.I. de C.V.; and Wesley Rios, Commercial director of Viakon México, Viakable. The session was moderated by 2023 WAI President, and President of SDI LaFarga COPPERWORKS, Kurt Breischaft.

Nine presentations were given Tuesday. Both days featured activity in the adjacent Suppliers Market, where representatives from 34 exhibiting companies met with attendees.

NOVEMBER 15
Visitors toured both the Viakable plant to see the company’s continuous casting operations and its Technical Center.

SPONSORS: Calmec, Cemanco, Fort Wayne Wire Die, FRIGECO USA, SDI LaFarga COPPERWORKS, Setic/ Pourtier, Thermoplastics Engineering Corp., Troester GmbH & Co. KG, and Viakon/Viakable

CONFERENCE COMMITTEE
2009 WAI Past President Antonio Ayala of AA Enterprise; Raύl Garcia director of technology and engineering, Viakable; and Eugenio Urbina, director business development, Troester.

WAI, founded in 1930, is a not-for-profit association with more than 2,200 individual members in 50 countries. The association serves the educational needs of the wire and cable manufacturing industry through a variety of products and services. WAI manages the Interwire Trade Exhibition and Wire Expo and publishes the Wire Journal International and the Wire Journal International Reference Guide.

Media Contacts: Janice E. Swindells, Director Marketing & Corporate Communications, This email address is being protected from spambots. You need JavaScript enabled to view it., Tel.: 001-203-453-2777, x. 117; Steven J. Fetteroll, Executive Director, This email address is being protected from spambots. You need JavaScript enabled to view it., Tel.: 001-203-453-1777.

Madison, Connecticut, USA. The Wire Association International (WAI), Inc. announces the appointment of Kurt F. Breischaft as the 70th president of the association for a one-year term that commences on Jan. 1, 2023. Breischaft will chair the Board of Directors of the 93-year-old association, which is headquartered in Madison, Connecticut, USA.
Breischaft has more than 30 years’ experience in the copper industry. He is president of SDI LaFarga COPPERWORKS, a copper rod and wire mill in New Haven, Indiana, a post he has held since November 2013. Prior to that Breischaft held roles of increasing importance including vice president and general manager of Cerro Plumbing, a Marmon Group/Berkshire Hathaway Company; plant manager for Belden Americas - Nogales, Mexico and Belden/Thermax; and positions as process engineer, engineering manager, plant manager, and manufacturing manager at the Essex Group, Inc./Superior Essex.

An active WAI member since 2000, Breischaft received its 2006 Wire Link Scholarship. His valuable contributions through volunteer leadership within the association include serving two terms on WAI’s Board of Directors; participation on WAI’s Executive and Oversight Committees; chair of its Member Relations Committee; and Executive Committee Liaisonship to its Finance, Memorial Awards, and Education Committees. In addition to his role as 2023 WAI president, Breischaft will serve as Co-Chair of its Conference Programming Committee, Chair of its Oversight Committee, and Executive Committee Liaison to its Education Committee.

Commenting on this new appointment, Breischaft said, “I look forward to advancing the latest WAI education initiative, developing multimedia training modules, and building on WAI’s legacy products such as handbooks. This will be a crucial step for the next generation of industry engineers and operators.”

Breischaft holds a B.S. degree in electrical engineering from the Rose-Hulman Institute of Technology, Terre Haute, Indiana, USA, and an M.B.A. degree from Indiana Wesleyan University, Marion, Indiana, USA.

The Wire Association International, Inc. is governed by a network of volunteers from around the globe. Joining Breischaft for the 2023 term are members of the association’s 2023 Executive Committee: First Vice President Daniel Blais, Prysmian Group; Second Vice President Eric Bieberich, Fort Wayne Wire Die; David Fisher,
James Monroe Wire & Cable Corp.; and Immediate Past President James R. York, Insteel Industries, Inc.

SDI LaFarga COPPERWORKS is a joint venture between Steel Dynamics, Inc. and the La Farga Group. The company is driven by a team of just over 120 employees and utilizes a patented advanced refining process that melts environmentally friendly material as well as established shaft furnace technology. Both processes yield a high purity cast and rolled 8 mm copper rod product. Steel Dynamics Inc., headquartered in Fort Wayne, IN, is a member of the S&P 500 and is one of the largest metals recyclers and metals producers in North America. La Farga Group, headquartered in Barcelona, Spain., has been has providing copper recycling solutions since 1808.

WAI, founded in 1930, is a not-for-profit association with more than 2000 individual members in 50 countries. The association serves the educational needs of the wire and cable manufacturing industry through a variety of products and services. WAI manages the Interwire Trade Exhibition and the WAI Operations Summit & Wire Expo and publishes the Wire Journal International and the Wire Journal International Reference Guide.

Media Contacts: Janice E. Swindells, Director Marketing & Corporate Communications, This email address is being protected from spambots. You need JavaScript enabled to view it., Tel.: 001-203-453-2777, x. 117; Steven J. Fetteroll, Executive Director, This email address is being protected from spambots. You need JavaScript enabled to view it., Tel.: 001-203-453-1777.

1/31/2022 – SAMP USA reported two key positions. Sandy Scroggs, who has been with the company for more than 30 years, has been promoted to general manager. He will keep his current position as service manager. He started with SAMP in 1988 as a service technician, and was named service manager in 2000. Brett Hamner has been named senior sales manager. He started his career in 1982 with Belden, working in different engineering roles, before transitioning in 1988 to Harbour Industries, where he was an R&D engineer. He joined General Cable in 1989, working in engineering, then moved into a corporate engineering role at their headquarters in Kentucky. In 1995, he became a project manager for Nokia Maillefer in Norcross, Georgia, and soon after added sales responsibilities. In 1997, he moved to Ontario, Canada, working with Ceeco during a period that saw the creation of Nextrom, before starting his own company—Cable and Tubing Solutions—in 2003. Based in Williamsport, Maryland, SAMP USA is part of Italy’s SAMP Srl, a global supplier of wire and cable drawing, extruding and bunching technology.

Ricardo (Rico) Dostal has joined Proton Products as a U.S. regional manager, based in Texas. A U.S. Navy veteran, he cultivated an interest in industrial technology while serving as an avionics electronic technician on board the USS Kitty Hawk. He then moved to Japan and served as an instructor and development team leader for three years, before working for Verizon Wireless for eight years, then five years for Rotalec USA, a distributor of industrial automation products. He started as a technician and was later promoted to application specialist for exclusive, non-contact sensor lines for the U.S. His primary focus was custom measurement and control projects, some of which featured Proton Products technology. Based in the U.K., Proton Products supplies instrumentation and control equipment for wire and cable production.

Cable Consultants Corporation has named Mason McClaugherty as vice president of sales and technical services. He has experience from three prior engineering positions with Cleveland-Cliffs, AK Steel Corporation and Service Wire Company. He holds a B.S. degree in mechanical engineering for Marshall University. He replaces Fred Hardy, an industry veteran who in 1993 was offered the position of director of technical services by company founder and owner Dr. Dimitri Stein. Based in Larchmont, New York, Cable Consultants Corporation supplies North American manufacturers with access to technology from European companies

Greg Gitto has been promoted from market development manager-PVC to director of sales & marketing-PVC for Chroma Color Corporation (CCC). He joined CCC last June though its acquisition of Color Resource, where he had worked as executive vice president since 2009. He has 20 years of extensive experience in PVC compounding and developing new PVC and olefinic products during a period that saw the inception of low-smoke PVC into plenum cable compounds. At Color Resource, he helped develop hybrid constructions with FEP, and Color Resource’s Quasar technology, now branded as ChromaQuasar, to serve the emerging XLPE wire and cable market. He holds a degree in economics from Clark University. Based in Delaware, Ohio, Chroma Color Corporation is a leading supplier of specialty color and additive concentrates for markets that include wire and cable.

1/31/2022 – The New England Chapter is ready for the Feb. 24 return to the Mohegan Sun in Connecticut, where more than a hundred people are expected to attend its annual meeting.

The annual dinner will be held for the first time at the casino’s Cabaret Theater. The event format will be the same, starting with a reception at 5:30 pm, where chapter members and others can mingle, an opportunity that has been all too rare the last two years. The new officers for 2022 will be introduced, as well as an update on the chapter’s college scholarship program."

“It will be great seeing everyone again at Mohegan Sun,” said 2021 WAI Chapter President John Accorsi, M. Holland, whose term will have ended. “It is always a fun venue for the meeting.” He said that it was unfortunate it could not be held in 2021, but the chapter was still able to remain active, holding its annual golf tournament as well as a successful webinar.

The chapter meeting will also include the traditional raffle, which along with the annual golf tournament are the key sources for funding the scholarship program. The chapter hopes to see the same level of prior year company donations for the raffle as well as sponsorships, of which there are three levels: gold, $500; silver, $250; and bronze, $150.

The cost for the event is $120 for New England Chapter members, $130 for WAI members and $140 for non-WAI members. There also is a new WAI member package of $145 for dues and the dinner, and for $15, an existing WAI member can become a New England Chapter member.

For more details on this, contact WAI’s John Markowski at 203-453-2777, ext. 121, or This email address is being protected from spambots. You need JavaScript enabled to view it.. Markowski, who began working as an intern for WAI in 2018 and became a full-employee last May, is the main contact for all of the Association’s chapters.

8/9/21 – The Wire Association International (WAI), Inc. announces two keynote speakers to open each day of Interwire 2021 at the Georgia World Congress Center, Atlanta, Georgia, USA. Both presenters focus on a desire for change to make every day a rewarding experience—one emphasizing leadership, the other through operational improvements and technology.

Tuesday, Oct. 26. Award-winning documentary filmmaker Brett Culp, founder of The Rising Heroes Project, will address the audience with his presentation titled: “Superhero Leadership: How everyday people can have an extraordinary impact,” at 10:00 a.m.

Through his groundbreaking non-profit documentary work, Culp has pioneered the art of creating “mini-movements” that inspire the super-human spirit in all of us. His approach to community-building and relationship-driven engagement invite people to connect with a noble vision and make a difference together. Passionate, energetic, and engaging, he encourages audiences to find the superhero within and their own path to “everyday leadership.” His insights on connecting individuals to an organization’s mission and goals resonate, help us realize our greatest personal and business potential, and renew our collective sense of hope for the future.

Culp is known for the films, Legends of the Knight, and Look to the Sky, both of which explore the power of heroic stories and heroic individuals to inspire us to believe in a better tomorrow. His newest film, A Voice That Carries, premiered in early June 2021. His films are featured on Netflix, iTunes, Hulu, and other top digital platforms.

Wednesday, Oct. 27. Kathleen Edge, Executive Vice President of Operations at Southwire Company, LLC, will discuss “Southwire’s connected flexible operating system” at 10:00 a.m.

The Industrial Revolution 4.0 has been a decade in the making. The wire and cable industry is delivering power to this revolution with solutions and services. Southwire is on a mission to revolutionize operations and make the lives of its operators easier and more rewarding by equipping experienced employees with tools to realize the true benefits of technology.
Edge has led a group of 34 manufacturing locations, as well as ten distribution centers, and many worldwide support areas with a method that emphasizes lean operational toolkits; modernization; and safety improvements.

Industry 4.0 – the theme of the Interwire show – is evident in the activities and aspects taking place on the show floor including: the Industry 4.0 Pavilion, exhibits, mini briefings, and conference sessions. See the full program at www.interwire21.com.

REGISTRATION:
Interwire 2021 registration is open at www.interwire21.com. Since all activities will be held on the exhibit floor, registration includes the Industry 4.0 sessions, exhibits, keynotes, production solution demonstrations, and the welcome reception. Advance registration pricing is as follows: WAI member: $75 USD; New WAI member: $140 USD; Nonmember: $175. Registration for the hybrid Fundamentals of Wire Manufacturing course is separate with advance rates as follows: WAI member: $295 USD; New WAI member: $395 USD; Nonmember: $445.

The Wire Association International is a not-for-profit association with 1,800 individual members in 50 countries. The association serves the educational needs of the wire and cable manufacturing industry through a variety of products and services. WAI manages the Interwire Trade Exposition and the WAI Operations Summit & Wire Expo and publishes the Wire Journal International and the Wire Journal International Reference Guide.